Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP Stainless EVO 9 Turbine Housing
CHRA - Xona Rotor Dual Ceramic Ball Bearing
Oil Line - Included
The FP Zephyr Ball Bearing turbo for Evo 4-9 uses a 79HTZ compressor wheel rated at 65LB a minute. We combine this compressor wheel with our Xona billet CHRA in our stainless exhaust housing for a turbo that is truly one of a kind and makes big usable power.
2015 Buschur Racing Shootout Stock Appearing approved turbo.
All EVO turbos now come standard with our new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" V-Band outlet and a TiAL MV-S waste gate flange machined directly onto the housing. Choose the "EVO 9 O2 Housing Cast" from the related items at the bottom of this page for the O2 housing that mates up to this turbine housing. Additionally, this turbine housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.