Shopping Cart
Your cart is empty
My Cart
Home Info Center Customer Cars My Account
Xona Rotor Turbochargers
Lancer Evolution
  Evolution 4-9 Turbochargers
  Evolution X Turbochargers
  Intake System
  Turbo Hardware
Subaru WRX/STi
Diamond Star
Upgrades & Rebuilds
TiAL Sport WG & BOV
Medium/Large Journal Bearing Turbochargers
Specials / Garage Sale

FP ZERO Ball Bearing Turbocharger for the Evolution IX

FP ZERO Ball Bearing Turbocharger for the Evolution IX
Customer Rating:  5 out of 55 out of 55 out of 55 out of 55 out of 5 (3 reviews)
Quantity in Basket: None
Shipping Weight: 21.00 pounds
Price: $2,599.00
O2 Housing:
Turbine Housing Coating:

Includes EVO Feed from head oil line, a $200 value!


  • Compressor wheel - 86HTZ
  • Flow rating - 78LB per minute
  • CW Measurements - 62.1MM Inducer / 86.2MM Exducer
  • TW Measurements - 67.7MM Inducer / 62.2MM Exducer
  • Compressor Housing - 84MM Flow Advancement Port Cover
  • Turbine Housing - FP Stainless EVO 9 Turbine Housing
  • CHRA - Xona Rotor Dual Ceramic Ball Bearing
  • Oil Line - Included

The all new Ball Bearing FP Zero for EVO 4-9 utilizes a new stainless CHRA and 86HTZ compressor wheel with a flow rating of 78LB a minute. This is the biggest and baddest stock location turbo we offer.

Zero and Zephyr Full Feature List

2015 Buschur Racing Shootout Stock Appearing approved turbo.

Info on turbine housing coating.

All EVO turbos now come standard with our new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" V-Band outlet and a TiAL MV-S waste gate flange machined directly onto the housing. Choose the "EVO 9 O2 Housing Cast" from the related items at the bottom of this page for the O2 housing that mates up to this turbine housing. Additionally, this turbine housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.

Related Item(s)
Code Name Price
6009030 EVO 9 O2 Housing Cast $250.00
6007020 Evo 9 Manifold Hardware Kit $60.00
LoctiteAntiSeize LOCTITE Heavy Duty Anti-Seize $12.50
6001020 FP EVO 4-9 Race Manifold $275.00
30030 Mitsubishi EVO Turbine Inlet Gasket $15.00
3003 Turbo Oil Drain Gaskets $2.00
3002020 FP Evo 8 Install Kit $149.00
FPAIPEVO FP Evo 8/9 3.25" / 84mm Intake Pipe $129.00

Customer Reviews
Average Customer Review:
5 out of 55 out of 55 out of 55 out of 55 out of 5 (3 reviews)
Share your thoughts with others:
Write an online review!

5 out of 55 out of 55 out of 55 out of 55 out of 5  Best street turbo out for big horsepower Evo's - 4/16/2017
By: Jeremy Heath (Mobile, AL)
Looking for 600+ awhp on 93 pump gas? 800+ awhp on E85? No need to go with a T3 setup on your street car Evo when you can run the FP Zero that bolts up like the factory turbo and make gobs of power without the lag of a large T3 turbo. On a built 2.4L long rod motor with supporting mods at 40-42psi on E98 (full boost @4200rpm!) we were able to crank out almost 850awhp and close to 700 ft. lbs. of torque! We have another FP zero Evo with a similar build sheet going to the dyno and i'm sure the numbers will be close to the same. Simply an amazing turbo that hits hard and pulls like a freight train. [URL=][IMG][/IMG][/URL]
5 out of 55 out of 55 out of 55 out of 55 out of 5  FP Zero...Awesome Turbo! - 7/18/2016
By: Courteney (Las Vegas, NV)
Purchased the FP Zero along with O2 cast housing, and Tial waste gate for my Evo 8. Had it installed and tuned and made 600awhp and 512awtq at only 30psi. This turbo makes at ton of power and awesome spool up. Very satisfied with my purchase. Thank you FP!
5 out of 55 out of 55 out of 55 out of 55 out of 5  SICK!! - 12/14/2014
By: Francesco Torres (Caracas, MI)
awesome spool!! i am running 600 AWHP @ 32psi with direct port methanol inyection on my evo 9.. SICK CAR

All sales are final. Returns subject to 20% restocking fee. For complete details, see FP Policy Information.

Forced Performance Turbochargers, 601 Martin Duke Rd. Van Alstyne, TX 75495 - Tel: (972) 984-1800
  © 2009 Forced Performance, Inc.
Home Site Map Info Center Sponsored Cars Customer Cars My Account My Cart Checkout