New for 2020! All FP Black model turbos will come standard with a black coated compressor cover!
Compressor wheel - 82HTZ
Flow rating - 71LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP 8CM or 10CM
CHRA - FP Journal Bearing
Oil Line - Not Included
The FP Black features our 82MM HTZ wheel rated at 71LB a minute
which has produced over 600WHP in the EVO community. Spinning the
compressor wheel is our clipped 67MM turbine wheel stuffed into
an 8CM turbine housing. This turbo is available internally gated but if
you have an O2 housing setup for
external you can bolt it right up to this turbo, no custom O2 housing
Adriana Noonen goes 8.89@152 with the Journal Bearing Black!
This turbo requires that oil be fed off the filter housing which can be accomplished by purchasing our 1G Oil Supply Line. For all of our journal bearing turbos we recommend a high quality oil see below for our
oiling information sheet.
Attention: All Forced Performance turbochargers are built
to order to your exact specifications and should not be considered on
the shelf ready to ship unless specifically noted on the work order.
Build times vary by model of turbo and options of said turbocharger,
therefore we cannot guarantee a delivery date or ETA.