FP BLACK for Subaru WRX/STi

2025150
$1,325.00
FP BLACK for Subaru WRX/STi
Processing...

Product Details


Oil supply line and gasket set included!

Subaru Black HTZ

  • Compressor wheel - 82HTZ
  • Flow rating - 71LB per minute
  • CW Measurements - 59.1MM Inducer / 82MM Exducer
  • TW Measurements - 67.3MM Inducer / 58.8MM Exducer
  • Compressor Housing - 84MM FAP Cover
  • Turbine Housing - FP 8CM or 10CM Subaru Turbine Housing
  • CHRA - FP Journal Bearing
  • Oil Line - Included

The FP Black™ turbocharger for the Subaru WRX/STI features the 82mm HTZ™ compressor section with our 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2 or 10cm2 turbine section. This combo nearly maxes out the stock location possibilities on this platform. The FP Black™ flows 71LB a minute and is capable of producing upwards of 575WHP.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Subaru Oil Feed Line Installation Instructions

Porting is available for this turbocharger. Please take a look at our Porting Services page for examples.

Requires TGV Delete to fit in stock location

Subaru Oil Line PSA

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.