Redesigned for 2018!
Oil supply line and gasket set included!
- Compressor wheel - HTZ 79
- Flow rating - 65LB per minute
- CW Measurements - 57.3MM Inducer / 79MM Exducer
- TW Measurements - 67.3MM Inducer / 58.8MM Exducer
- Compressor Housing - 84MM FAP Cover
- Turbine Housing - FP 8CM or 10CM Subaru Turbine Housing
- CHRA - FP Journal Bearing
- Oil Line - Included
Redesigned in 2018, the Subaru FP Red has our HTZ 79 compressor wheel in our 84MM Flow Advancement Port™ compressor cover to give you the same power as the old Red with massively improved spool and response time.
In the past we have sold two different types of oil lines. They
were known as Type 1 or Type 2, and it was too easy to get confused as
to the type needed due to various model differences across the years.
To solve this problem, we developed a new oil feed line that includes
the parts for both Type 1 and Type 2 cars. The installation instructions
below will show which parts to use based on which type of car you have,
which is why
we are still using the Type 1 and 2 designators.
Subaru Oil Feed Line Installation Instructions
84MM FAP Cover Requires TGV Delete to fit in stock location
Subaru Oil Line PSA
All Forced Performance turbochargers are built to
order to your exact specifications and should not be considered on the
shelf ready to ship unless specifically noted on the work order. Build
times vary by model of turbo and options of said turbocharger, therefore
we cannot guarantee a delivery date or ETA.