Subaru XR FA20 Blue
- Compressor wheel - 73HTZ
- Flow rating - 57LB per minute
- CW Measurements - 52.6MM Inducer / 73MM Exducer
- TW Measurements - 60.8MM Inducer / 54MM Exducer
- Compressor Housing - Factory Size Stock Appearing Cover
- Turbine Housing - 10CM FA20 Fitment Turbine Housing
- CHRA - Xona Rotor Ball Bearing
- Wastegate Actuator - 15PSI Tial MVI
- Oil Line - Included
The XR FA20 Blue™ turbocharger for the 2015+ Subaru WRX features the 73mm HTZ™
with a stock fitment, stock appearing cover coupled to the 10cm2 turbine
section. This bolt on solution produces a great balance of spool and
power and gives you the enhanced durability of the Xona Rotor Ball
Bearing billet CHRA.
The FA20 Blue™ flows 57LB a minute and is capable of producing
upwards of 475WHP. This turbo comes with an oil line and gasket set,
giving you everything you need to bolt it straight onto your car. The
factory oil drain sump will be kept and reused, it is shown in pictures
for fitment only and is not included.
The Dyno Graph in the pictures is a 2015 WRX tuned by Clark Turner.
Note: The FA20 Blue is developed specifically for the 2015+
WRX platform, it will not fit any other platform with the FA20 motor.
Additionally it will not fit any vehicle with the EJ series of motors.
Porting is available and recommended for this turbocharger in
order to fully realize the performance gains. Please take a look at our
Porting Services page for examples.
Attention: All Forced Performance turbochargers
are built to order to your exact specifications and should not be
considered on the shelf ready to ship unless specifically noted on the
work order. Build times vary by model of turbo and options of said
turbocharger, therefore we cannot guarantee a delivery date or ETA.